Notes
Slide Show
Outline
1
Chapter 18
  • AC Series-Parallel Circuits
2
AC Circuits
  • Rules and laws developed for dc circuits apply equally well for ac circuits
  • Analysis of ac circuits requires vector algebra and use of complex numbers
  • Voltages and currents in phasor form
    • Expressed as RMS (or effective) values
3
Ohm’s Law
  • Voltage and current of a resistor will be in phase
  • Impedance of a resistor is: ZR = RÐ0°
4
Ohm’s Law
  • Voltage across an inductor leads the current by 90°(ELI the ICE man)
5
Ohm’s Law
  • Current through a capacitor leads the voltage by 90° (ELI the ICE man)
6
AC Series Circuits
  • Current everywhere in a series circuit is the same
  • Impedance used to collectively determine how resistance, capacitance, and inductance impede current in a circuit
7
AC Series Circuits
  • Total impedance in a circuit is found by adding all individual impedances vectorially
8
AC Series Circuits
  • Impedance vectors will appear in either the first or the fourth quadrants because the resistance vector is always positive
  • When impedance vector appears in first quadrant, the circuit is inductive
9
AC Series Circuits
  • If impedance vector appears in fourth quadrant
    • Circuit is capacitive
10
Voltage Divider Rule
  • Voltage divider rule works the same as with dc circuits
  • From Ohm’s law:
11
Kirchhoff’s Voltage Law
  • KVL is same as in dc circuits
  • Phasor sum of voltage drops and rises around a closed loop is equal to zero
12
Kirchhoff’s Voltage Law
  • Voltages
    • May be added in phasor form or in rectangular form
  • If using rectangular form
    • Add real parts together
    • Then add imaginary parts together
13
AC Parallel Circuits
  • Conductance, G
    • Reciprocal of the resistance
  • Susceptance, B
    • Reciprocal of the reactance
14
AC Parallel Circuits
  • Admittance, Y
    • Reciprocal of the impedance
  • Units for all of these are siemens (S)
15
AC Parallel Circuits
  • Impedances in parallel add together like resistors in parallel
  • These impedances must be added vectorially
16
AC Parallel Circuits
  • Whenever a capacitor and an inductor having equal reactances are placed in parallel
    • Equivalent circuit of the two components is an open circuit
17
Kirchhoff’s Current Law
  • KCL is same as in dc circuits
  • Summation of current phasors entering and leaving a node
    • Equal to zero
18
Kirchhoff’s Current Law
  • Currents must be added vectorially
  • Currents entering are positive
  • Currents leaving are negative
19
Current Divider Rule
  • In a parallel circuit
    • Voltages across all branches are equal
20
Series-Parallel Circuits
  • Label all impedances with magnitude and the associated angle
  • Analysis is simplified by starting with easily recognized combinations
21
Series-Parallel Circuits
  • Redraw circuit if necessary for further simplification
  • Fundamental rules and laws of circuit analysis must apply in all cases
22
Frequency Effects of RC Circuits
  • Impedance of a capacitor decreases as the frequency increases
  • For dc (f = 0 Hz)
    • Impedance of the capacitor is infinite
23
Frequency Effects of RC Circuits
  • For a series RC circuit
    • Total impedance approaches R as the frequency increases
  • For a parallel RC circuit
    • As frequency increases, impedance goes from R to a smaller value
24
Frequency Effects of RL Circuits
  • Impedance of an inductor increases as frequency increases
  • At dc (f = 0 Hz)
    • Inductor looks like a short
    • At high frequencies, it looks like an open
25
Frequency Effects of RL Circuits
  • In a series RL circuit
    • Impedance increases from R to a larger value
  • In a parallel RL circuit
    • Impedance increases from a small value to R
26
Corner Frequency
  • Corner frequency is a break point on the frequency response graph
  • For a capacitive circuit
    • wC = 1/RC = 1/t
  • For an inductive circuit
    • wC = R/L = 1/t
27
RLC Circuits
  • In a circuit with R, L, and C components combined in series-parallel combinations
    • Impedance may rise or fall across a range of frequencies
  • In a series branch
    • Impedance of inductor may equal the capacitor
28
RLC Circuits
  • Impedances would cancel
    • Leaving impedance of resistor as the only impedance
  • Condition is referred to as resonance
29
Applications
  • AC circuits may be simplified as a series circuit having resistance and a reactance
  • AC circuit
    • May be represented as an equivalent parallel circuit with a single resistor and a single reactance
30
Applications
  • Any equivalent circuit will be valid only at the given frequency of operation